The Ecoclear process

How the Ecoclear® works


Collection is the first step to the cleaning process. Before beginning a project, contractors need to set up a wastewater capture system. The method of capture depends on the project, but typically involves damming up and guiding the water to a holding area where it can be collected and treated.


Next, the EcoClear goes to work, pumping collected water into an inlet chamber (#1), where a flocculating agent is automatically added to help clump the particles in the water. The water then flows into a second chamber (#2) that introduces carbon dioxide to neutralize the pH. In the next chamber (#3), the floc, or solid particles, settles into a storage hopper (#4) and is removed by the integrated pump. The water continues to another chamber (#5) for a second pH adjustment. A final monitoring tank (#6) confirms the water pH has returned to the desired set point before it’s discharged.

ecoclear aquajet reco control system hydrodemolition water treatment concrete environment production safety aqua cutter

Optical turbidity sensors and pH probes continuously monitor and record the water quality to ensure only clean water is discharged. If the water does not meet set limits, the feed pump automatically shuts down to prevent dirty water from escaping. The water then starts to recirculate until it meets the preset values of pH and turbidity.


The EcoClear system can move as much as about 88 gpm, or about 5,283 gallons (20 cubic meters) per hour, ensuring used water is treated quickly.


Clear Difference

One of the key differences that sets the EcoClear apart from other OEM and advanced water treatment systems is the use of carbon dioxide, rather than mineral acid, to reduce pH levels.


Handling any acid requires special training and PPE. There is also a risk of acidifying water if acid levels are not precisely calculated.


CO2, on the other hand, makes it virtually impossible to acidify the water. This method doesn’t leave any hazardous byproducts, either.


For bottom-line-conscious contractors, CO2 also has another advantage over other OEM systems. CO2 is four to eight times less expensive than commonly used acids for pH reduction for a cost of about $0.01 per treated gallon of water. This does not factor in electric supply, maintenance costs or initial investment, but over the lifetime of the machine, it provides significant savings over third-party options and other OEM equipment.


Clear Results

In the end, though, it’s not only about what you can do, but what you can prove. Government agencies and project managers require documentation. That’s why the EcoClear provides detailed, real-time data through the RECO control system. This information can be shared with project stakeholders to provide insight to the properties of the discharged water, including pH levels and the amount of water that was treated.

ecoclear aquajet reco control system hydrodemolition water treatment concrete environment production safety aqua cutter


Clear Choice

As Hydrodemolition contractors look to remain competitive amid fluctuating environmental regulations, partnering with a cutting-edge manufacturer can provide a compact, cost-effective solution that increases sustainability — with the documentation to back it all up.



Read more about Ecoclear >>

Read more about the water treatment process >>

Read more about recirculation of water >>