The Aqua Cutter 710VE, with its electric engine, is the perfect choice for all kinds of operations where exhaust emissions are prohibited and/or the noise level has to be limited. Our innovative design gives the operator freedom to reach all horizontal, vertical and overhead areas up to 7 meters (23 ft) without support. In other words, where most robots would fail, the Aqua Cutter 710VE is the given choice.
Our unique 3D positioning system can perform wonders. The front power head gives the operator full freedom to efficiently reach all areas. One example is vertical operations alongside or against the surface. Due to the compact design the Aqua Cutter 710VE can be operated in tight and confined areas, with retained mobility, no exhaust emissions and at a low noise level.
The Aqua Cutter Evolution 2.0 control system features highly computerized robotic management for all advanced operations.
The evolution control system enables you to program geometrical figures and operate at different depths in the same overpass. The display is interactive and graphic, making it very easy to program the robot.
All of our Aqua Cutter robots feature our patented EDS system, short for Equal Distance System. The EDS keeps a preset distance from the nozzle to the concrete surface, regardless of the attack angle of the water jet. This is a major advantage. Standard systems without EDS make the water jet lose a lot of power before it hits the concrete.
The innovative design provides unrivaled ease of access for all maintenance jobs. This means less downtime for maintenance and more time for actual work.
The unique gullwing hood and the foldable back cover of our Aqua Cutter 710 robot offer total access for both daily maintenance, such as checking oil levels, and regular service, such as oil and filter changes. This applies to all 710-models.
Intelligent Sensing Control, ISC, uses intelligent software that operates via closed loop systems that continuously memorize the movements of the water jet. It also monitors the process from the operator’s settings. The system is standard on all Aqua Cutter robots as well as the Ergo, used for controlling the Aqua Spine.
| Specifications | 710VE evolution |
|---|---|
| Total weight | 2350 kg (5181 lb) |
| Length | 2,57-2,82 m (8,4-9,2 ft) |
| Min. width | 1,03 m (3,4 ft) |
| Track width | 1,03-1,63 m (3,4 -5,4 ft) |
| Min. height | 1,3/1,6 m (4,2/5,2 ft) |
| Operating height | 7 m (23 ft) |
| Side reach | 2 m (6,6 ft) |
| Lance angle | ±45° |
| Working width | 0-2,45 m (0-8,0 ft) |
| Working width extended | 0-4,45 m (0-14,6 ft) |
| Drive source | Electric motor 11kW |
| Voltage | 3×400 VAC @ 50Hz / 3×480 VAC @ 60Hz |
