Create precise, defined shapes directly in the concrete—ideal for localized repairs and controlled removal.

Remove concrete at different depths across the same surface, enabling efficient work in complex structures.

Curved edges and structural elements can be handled with precision, maintaining consistent removal along the surface. The system also enables controlled cutting of defined shapes where needed.

With the Extension kit, the Aqua Cutter can access bridge sides and vertical surfaces such as piers—enabling precise removal in hard-to-reach areas.

With the Extension kit, the Aqua Cutter can operate beneath structures such as bridge decks—allowing controlled removal where direct access is limited.

The Extension kit has a wide bend range. Adjustable from 0° to 112.5°, enabling precise positioning on different surfaces and geometries.

The power control module on the Aqua Cutter 410 and 450 can be separated from the robot, allowing the crawler to operate in wet or submerged environments while keeping sensitive electronics safely positioned away from water, impact, and debris.

With a disconnectable PCM, the crawler can operate in tight spaces where the full robot cannot fit—while the control module remains safely positioned outside.

Perform precise removal on high vertical surfaces such as walls, towers, and structural elements—maintaining control and consistent results at height.

Perform precise removal along vertical surfaces, enabling controlled hydrodemolition across walls and structural elements.

Carry out controlled hydrodemolition in narrow areas, following walls and curved surfaces with accuracy.

Perform precise removal on roofs and high structures—enabling safe and controlled work at height.

The Extender adapts to sloped roofs and surfaces, maintaining stable positioning and consistent removal.

Reach between pillars and into tight structures without compromising precision or control.

Access and remove concrete up to 1.0 m (3.3 ft) below grade—ideal for foundations, pits, and recessed structures where depth and control are critical.

Perform hydrodemolition along surfaces and into recessed areas below grade, enabling precise removal along edges, walls, and confined structures.

Perform precise hydrodemolition on columns, shafts, and curved surfaces—ensuring consistent removal around the entire structure.

Perform efficient surface preparation and shallow hydrodemolition—removing deteriorated concrete, coatings, and contaminants while preserving the underlying structure.

Perform hydrodemolition all the way around inside tunnels or other circular/curved surfaces — ensuring consistent removal across the full circular surface.

Detach the power control module and power the crawler remotely, enabling controlled hydrodemolition inside tunnels, pipes, and sewers where access is limited.

Perform precise hydrodemolition along curved and circular surfaces—on both inner and outer radii—maintaining consistent depth and surface quality throughout the operation.

Perform precise hydrodemolition using a climbing system mounted on scaffolding—enabling flexible work on both vertical and horizontal surfaces.

Beam brackets in different configurations—low, height-adjustable, and height-and-angle adjustable—allow the setup to adapt to different surfaces, heights, and angles.